Before using an enamel reaction kettle, we should check all aspects to ensure that all parts are functioning properly. Now let's talk about the specific checks before using this product.

Before using an enamel reaction kettle, we should check all aspects to ensure that all parts are functioning properly. Now let's talk about the specific checks before using this product. Please come and take a look.

1. Before using the enamel reaction kettle, it is also necessary to check whether the operating environment can meet the requirements. If not, the environment needs to be cleaned first.

2. Before using the enamel reaction kettle, check the equipment for the next use to see if there is any malfunction. If there is a malfunction, promptly eliminate it.

3. Also, let's see if the voltage and current used by the equipment can meet the requirements. If the voltage does not meet the requirements, the equipment cannot be started.

In summary, we have conducted relevant inspections before using the enamel reaction kettle, which played a bridging role and ensured the stability of subsequent work. If we insist on checking this product before use, it can not only improve everyone's work efficiency, but also indirectly extend its service life.

The outer layer of the enamel reaction kettle is a layer of enamel, which provides excellent protection for the equipment. Therefore, once the quality of the porcelain surface does not meet the standard, the protective effect of the equipment will be reduced, leading to problems such as corrosion during short-term use. So how to check if the porcelain surface quality of the equipment meets the standard?

1. First, observe that the color of the porcelain layer is basically consistent, the surface is smooth, and there are no more than three foreign objects on the non explosive porcelain surface, such as fish scale cracks, dark bubbles, tank body, and tank cover. The foreign object should be ≤ 8mm2, and the distance between the two pieces should not be ∠ 100mm.

2. Use a high-frequency spark generator for flaw detection. When using an electric spark generator for testing, the voltage used is generally controlled at 5000 volts. When the detection voltage of important equipment needs to be increased, the consent of the enamel reaction vessel manufacturer must be obtained;

3. Use a 60 watt safety light to check for porcelain peeling and cracking.

But if you want to test the porcelain surface of the enamel reaction kettle, you must use the correct method and follow the correct testing standards, so that the test results will be more accurate, and then determine whether the quality of the porcelain surface of the equipment meets the standards.